OMNICLEAN
-Vertical furnace tubes up to 16 3/4” in diameter can be cleaned.
-Oversize carousel is equipped with specialized fixturing to handle boats, T/C’s and pedestals.
-Meets the stringent H6 building code by storing less than 25 gallons of acid for a dual chemical cycle.
-Available with fire safe construction featuring Corzan 4910 exterior.
-200mm and 300mm configurations available.
(printer-friendly datasheet)

TYPHOON
-Dual oversize carousels are capable of handling a wide range of parts.
-A tube or liner plus various items on each side.
-Each side operates with simultaneous and independent recipes with isolated process systems.
-Four tanks included to provide a recirculating and a single use polish acid for each side.
-200mm and 300mm configurations available.
(printer-friendly datasheet)

DOUBLE/DOUBLE
-Dual chamber system precision cleans quartzware behind a single front door.
-Each system has separate tube and parts chambers or twin tube chambers with custom fixturing.
-Right chamber handles tubes 48” to 120” long.
-Left chamber has 360^o rotating carousel for spray etching of cantilevers, sheaths, boats, paddles, pull rods and assorted parts.
(printer-friendly datasheet)

TRIPLE TOWER
-Vertical tube cleaner with three distinctive types of cleaning for all horizontal furnace parts.
-Tubes are consistently etched with the patented Turbo-Nozzle^TM to clean both inside and outside.
-Paddles, cantilevers, sheaths and master boats rotate on the carousel for 360^o etching and rinsing.
-Boats and assorted small parts are immersion etched in the 16" X 12" X 12" sink below the carousel.
(printer-friendly datasheet)

EPITAXIAL BELL JAR CLEANER
-Wide range of soft-touch jaws handle the largest 300mm tubes up to 20 inches.
-Fully counter-balanced design is conservatively rated at 100 lbs. at full height and reach.
-Provides S-8 compliance for Poly-Flow quartzware cleaners.
-200mm and 300mm configurations available.
 

VERTICAL FURNACE QUARTZWARE CLEANER (VFQC)
-Simultaneous cleaning of tubes and liners with dual rotating overhead spray manifolds.
-Dependable immersion cleaning for latest high capacity boats in the largest sink available today.
-Cleaning chamber handles 56" tubes with ease.
-One, two or three acid systems yield process flexibility.
-200mm and 300mm configurations available.
(printer-friendly datasheet)

HORIZONTAL QUARTZWARE CLEANER
-Features two process chambers.
-Front chamber provides selectable inside/outside etching for furnace tubes up to 86” standard.
-Rear chamber is fixtured for immersion etching of cantilevers, 
sheaths, boats, paddles, pull rods and other accessories.
-Dual acid configuration with one recirculating and one single use (polish etch).
(printer-friendly datasheet)